open_tree - open path or create detached mount object and attach to fd

#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <fcntl.h> /* Definition of AT_* constants */
#include <sys/mount.h>
int open_tree(int dirfd, const char *path, unsigned int flags);
#include <sys/syscall.h> /* Definition of SYS_* constants */
int syscall(SYS_open_tree_attr,
 int dirfd, const char *path, unsigned int flags,
 struct mount_attr *_Nullable attr, size_t size);

Note: glibc provides no wrapper for open_tree_attr(), necessitating the use of syscall(2).

The open_tree() system call is part of the suite of file-descriptor-based mount facilities in Linux.

• If flags contains OPEN_TREE_CLONE, open_tree() creates a detached mount object which consists of a bind-mount of the path specified by the path. A new file descriptor associated with the detached mount object is then returned. The mount object is equivalent to a bind-mount that would be created by mount(2) called with MS_BIND, except that it is tied to a file descriptor and is not mounted onto the filesystem.

  As with file descriptors returned from fsmount(2), the resultant file descriptor can then be used with move_mount(2), mount_setattr(2), or other such system calls to do further mount operations.

  This mount object will be unmounted and destroyed when the file descriptor is closed if it was not otherwise attached to a mount point by calling move_mount(2). This implicit unmount operation is lazy— akin to calling umount2(2) with MNT_DETACH; thus, any existing open references to files from the mount object will continue to work, and the mount object will only be completely destroyed once it ceases to be busy.

• If flags does not contain OPEN_TREE_CLONE, open_tree() returns a file descriptor that is exactly equivalent to one produced by openat(2) when called with the same dirfd and path.

In either case, the resultant file descriptor acts the same as one produced by open(2) with O_PATH, meaning it can also be used as a dirfd argument to "*at()" system calls. However, unlike open(2) called with O_PATH, automounts will by default be triggered by open_tree() unless AT_NO_AUTOMOUNT is included in flags.

As with "*at()" system calls, open_tree() uses the dirfd argument in conjunction with the path argument to determine the path to operate on, as follows:

• If the pathname given in path is absolute, then dirfd is ignored.

• If the pathname given in path is relative and dirfd is the special value AT_FDCWD, then path is interpreted relative to the current working directory of the calling process (like open(2)).

• If the pathname given in path is relative, then it is interpreted relative to the directory referred to by the file descriptor dirfd (rather than relative to the current working directory of the calling process, as is done by open(2) for a relative pathname). In this case, dirfd must be a directory that was opened for reading (O_RDONLY) or using the O_PATH flag.

• If path is an empty string, and flags contains AT_EMPTY_PATH, then the file descriptor dirfd is operated on directly. In this case, dirfd may refer to any type of file, not just a directory.

See openat(2) for an explanation of why the dirfd argument is useful.

flags can be used to control aspects of the path lookup and properties of the returned file descriptor. A value for flags is constructed by bitwise ORing zero or more of the following constants:

AT_EMPTY_PATH

If path is an empty string, operate on the file referred to by dirfd (which may have been obtained from open(2), fsmount(2), or from another open_tree() call). In this case, dirfd may refer to any type of file, not just a directory. If dirfd is AT_FDCWD, open_tree() will operate on the current working directory of the calling process. This flag is Linux-specific; define _GNU_SOURCE to obtain its definition.

AT_NO_AUTOMOUNT

Do not automount the terminal ("basename") component of path if it is a directory that is an automount point. This allows you to create a handle to the automount point itself, rather than the location it would mount. This flag has no effect if the mount point has already been mounted over. This flag is Linux-specific; define _GNU_SOURCE to obtain its definition.

AT_SYMLINK_NOFOLLOW

If path is a symbolic link, do not dereference it; instead, create either a handle to the link itself or a bind-mount of it. The resultant file descriptor is indistinguishable from one produced by openat(2) with O_PATH|O_NOFOLLLOW.

OPEN_TREE_CLOEXEC

Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor. See the description of the O_CLOEXEC flag in open(2) for reasons why this may be useful.

OPEN_TREE_CLONE

Rather than creating an openat(2)-style O_PATH file descriptor, create a bind-mount of path (akin to mount --bind) as a detached mount object. In order to do this operation, the calling process must have the CAP_SYS_ADMIN capability.

AT_RECURSIVE

Create a recursive bind-mount of the path (akin to mount --rbind) as a detached mount object. This flag is only permitted in conjunction with OPEN_TREE_CLONE.

open_tree_attr()

The open_tree_attr() system call operates in exactly the same way as open_tree(), except for the differences described here.

After performing the same operation as with open_tree(), open_tree_attr() will apply the mount attribute changes described in attr to the file descriptor before it is returned. (See mount_attr(2type) for a description of the mount_attr structure. As described in mount_setattr(2), size must be set to sizeof(struct mount_attr) in order to support future extensions.) If attr is NULL, or has attr.attr_clr, attr.attr_set, and attr.propagation all set to zero, then open_tree_attr() has identical behavior to open_tree().

The application of attr to the resultant file descriptor has identical semantics to mount_setattr(2), except for the following extensions and general caveats:

• Unlike mount_setattr(2) called with a regular OPEN_TREE_CLONE detached mount object from open_tree(), open_tree_attr() can specify a different setting for MOUNT_ATTR_IDMAP to the original mount object cloned with OPEN_TREE_CLONE.

  Adding MOUNT_ATTR_IDMAP to attr.attr_clr will disable ID-mapping for the new mount object; adding MOUNT_ATTR_IDMAP to attr.attr_set will configure the mount object to have the ID-mapping defined by the user namespace referenced by the file descriptor attr.userns_fd. (The semantics of which are identical to when mount_setattr(2) is used to configure MOUNT_ATTR_IDMAP.)

  Changing or removing the mapping of an ID-mapped mount is only permitted if a new detached mount object is being created with flags including OPEN_TREE_CLONE.

• If flags contains AT_RECURSIVE, then the attributes described in attr are applied recursively (just as when mount_setattr(2) is called with AT_RECURSIVE). However, this applies in addition to the open_tree()-specific behavior regarding AT_RECURSIVE, and thus flags must also contain OPEN_TREE_CLONE.

Note that if flags does not contain OPEN_TREE_CLONE, open_tree_attr() will attempt to modify the mount attributes of the mount object attached at the path described by dirfd and path. As with mount_setattr(2), if said path is not a mount point, open_tree_attr() will return an error.

On success, a new file descriptor is returned. On error, -1 is returned, and errno is set to indicate the error.

The following examples show how open_tree() can be used in place of more traditional mount(2) calls with MS_BIND.

int srcfd = open_tree(AT_FDCWD, "/var", OPEN_TREE_CLONE);
move_mount(srcfd, "", AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH);

First, a detached bind-mount mount object of /var is created and associated with the file descriptor srcfd. Then, the mount object is attached to /mnt using move_mount(2) with MOVE_MOUNT_F_EMPTY_PATH to request that the detached mount object associated with the file descriptor srcfd be moved (and thus attached) to /mnt.

The above procedure is functionally equivalent to the following mount operation using mount(2):

mount("/var", "/mnt", NULL, MS_BIND, NULL);

OPEN_TREE_CLONE can be combined with AT_RECURSIVE to create recursive detached bind-mount mount objects, which in turn can be attached to mount points to create recursive bind-mounts.

int srcfd = open_tree(AT_FDCWD, "/var",
                      OPEN_TREE_CLONE | AT_RECURSIVE);
move_mount(srcfd, "", AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH);

The above procedure is functionally equivalent to the following mount operation using mount(2):

mount("/var", "/mnt", NULL, MS_BIND | MS_REC, NULL);

One of the primary benefits of using open_tree() and move_mount(2) over the traditional mount(2) is that operating with dirfd-style file descriptors is far easier and more intuitive.

int srcfd = open_tree(100, "", AT_EMPTY_PATH | OPEN_TREE_CLONE);
move_mount(srcfd, "", 200, "foo", MOVE_MOUNT_F_EMPTY_PATH);

The above procedure is roughly equivalent to the following mount operation using mount(2):

mount("/proc/self/fd/100",
      "/proc/self/fd/200/foo",
      NULL, MS_BIND, NULL);

In addition, you can use the file descriptor returned by open_tree() as the dirfd argument to any "*at()" system calls:

int dirfd, fd;
dirfd = open_tree(AT_FDCWD, "/etc", OPEN_TREE_CLONE);
fd = openat(dirfd, "passwd", O_RDONLY);
fchmodat(dirfd, "shadow", 0000, 0);
close(dirfd);
close(fd);
/* The bind-mount is now destroyed */

open_tree_attr()

The following is an example of how open_tree_attr() can be used to take an existing id-mapped mount and construct a new bind-mount mount object with a different MOUNT_ATTR_IDMAP attribute. The resultant detached mount object can be used like any other mount object returned by open_tree().

int nsfd1, nsfd2;
int mntfd1, mntfd2, mntfd3;
struct mount_attr attr;
mntfd1 = open_tree(AT_FDCWD, "/foo", OPEN_TREE_CLONE);
/* Configure the id-mapping of mntfd1 */
nsfd1 = open("/proc/1234/ns/user", O_RDONLY);
memset(&attr, 0, sizeof(attr));
attr.attr_set = MOUNT_ATTR_IDMAP;
attr.userns_fd = nsfd1;
mount_setattr(mntfd1, "", AT_EMPTY_PATH, &attr, sizeof(attr));
/* Create a new copy with a different id-mapping */
nsfd2 = open("/proc/5678/ns/user", O_RDONLY);
memset(&attr, 0, sizeof(attr));
attr.attr_clr = MOUNT_ATTR_IDMAP;
attr.attr_set = MOUNT_ATTR_IDMAP;
attr.userns_fd = nsfd2;
mntfd2 = open_tree_attr(mntfd1, "", OPEN_TREE_CLONE,
                        &attr, sizeof(attr));
/* Create a new copy with the id-mapping cleared */
memset(&attr, 0, sizeof(attr));
attr.attr_clr = MOUNT_ATTR_IDMAP;
mntfd3 = open_tree_attr(mntfd1, "", OPEN_TREE_CLONE,
                        &attr, sizeof(attr));

open_tree_attr() can also be used with attached mount objects; the above example is only intended to be illustrative.

fsconfig(2), fsmount(2), fsopen(2), fspick(2), mount(2), mount_setattr(2), move_mount(2), mount_namespaces(7)